|
|
|
News
ALTERNATOR MODEL 5GTA41B3 PARTS
| Author： Date：2026-5-22 16:31:57 |
| ALTERNATOR MODEL 5GTA41B3 |
 PART NO. |
DESCRIPTION
|
| 5GTA41B |
ALTERNATOR (SEE PB-40029-005) |
| 84A203180P1 |
CARBON BRUSH |
| 41B532481P4 |
SUPPORT WITH INSULATED STUD AND KEY |
| 41B531649G2 |
BRUSHHOLDER |
| 41A232946G1 |
PRESSURE ARM |
| 41A232943P1 |
SPRING |
| 41A231194P1 |
WASHER, BRASS, 11/16 IN OD |
| N533P2522 |
PIN, SPRING DOWEL, 1/4 IN DIA, 1 3/8 IN LONG |
| 41A230733P4 |
BOLT W/WASHER, SL HX HD, 1/4 IN-20, 1/2 IN LONG |
| N22P23020B13 |
BOLT, HEX HD, 5/16 IN-18, 1 1/4 IN LONG |
| N203P23B13 |
NUT, HEX, 5/16 IN-18 |
| 41B538384G8 |
CABLE ASSEMBLY |
| 41B538384G9 |
CABLE ASSEMBLY |
| 41B539064P13 |
CABLE MARKER (MARKED F1) |
| 41B539064P14 |
CABLE MARKER (MARKED F2) |
| 8809650P1 |
WASHER, CONCAVE, 1/4 IN, SPR STL |
| N26P21012B13 |
BOLT, SL HEX HD, 1/4 IN-20, 3/4 IN LONG |
| 41B532401G9 |
CABLE ASSEMBLY, SPEED SENSOR |
| 41A264911P1 |
CONNECTOR, 0.125 IN TO 0.250 IN DIA CABLE |
| 41A235260P1 |
INSULATOR, 1 3/8 IN THICK, 1 3/4 IN OD |
| 41A235261P2 |
STUD, 1 IN LONG |
| 497A806P83 |
CEMENT |
| 41B537660P1 |
WASHER, FLAT, 0.435 IN ID, 0.675 IN OD |
| 41B537660P6 |
WASHER, FLAT, 0.562 IN ID, 0.938 IN OD |
| 41C635792P2 |
SPACER, 0.250 IN THICK |
| 41C635792P4 |
PLATE, CLAMPING |
| 41C635792P8 |
CLAMP, 0.850 IN THICK, THREE SLOTS |
| N22P23020B13 |
BOLT, HEX HD, 5/16 IN-18, 1 1/4 IN LONG |
| N22P23028B13 |
BOLT, HEX HD, 5/16 IN-18, 1 3/4 IN LONG |
| N22P25012B13 |
BOLT, HEX HD, 3/8 IN-16, 3/4 IN LONG |
| N22P25060B13 |
BOLT, HEX HD, 3/8 IN-16, 3 3/4 IN LONG |
| N22P29024B13 |
BOLT, HEX HD, 1/2 IN-13, 1 1/2 IN LONG |
| N203P23B13 |
NUT, HEX, 5/16 IN-18 |
| N402P42B13 |
WASHER, 5/16 IN |
| N405P42B13 |
LOCKWASHER, 5/16 IN |
| 84B517229G1 |
TERMINAL, MAIN CONNECTION |
| 84C620849G13 |
CABLE ASSEMBLY (T1) |
| 84C620849G14 |
CABLE ASSEMBLY (T2) |
| 84C620849G15 |
CABLE ASSEMBLY (T3) |
| 84C620983P1 |
COVER, MAIN CONNECTION |
| 41A262893P3 |
MAGNETIC PICKUP, SPEED SENSOR |
| 84C620844P2 |
HUB |
| 41A235861P2 |
DOWEL PIN |
| 84C620949G1 |
ADAPTER |
| 84D707047G3 |
STATOR ASSEMBLY |
| 84D707047G2 |
STATOR REWIND KIT |
| 41C635787G15 |
STATOR FRAME AND CORE ASSEMBLY |
| 41C636067G2 |
CONNECTION STRAP, INSULATED, 81.75 IN DEV LGTH |
| 41B537038G1 |
BRACKET, INSULATED |
| 41B535823G1 |
BRACKET, INSULATED |
| N22P29016B13 |
BOLT, HEX HD, 1/2 IN-13, 1 IN LONG |
| 41B537660P6 |
WASHER, FLAT, 0.562 IN ID, 0.938 IN OD |
| 41B535564G6 |
CABLE ASSEMBLY, 11 1/4 IN LONG |
| 41A231281P457 |
BRAZING STRIP, 3/8 IN X 1 1/2 IN, 0.005 IN THK |
| 41B538372G1 |
CONNECTION STRAP, INSULATED |
| 41B537912G1 |
INSULATOR WITH STUD |
| N258P25B13 |
NUT, HEX, 3/8 IN-16 |
| 41B535670P3 |
COVER |
| 41A239348P2 |
INSULATION PAD, 5 IN LONG |
| 41A235261P2 |
STUD, 1 IN LONG |
| N22P25012B13 |
BOLT, HEX HD, 3/8 IN-16, 3/4 IN LONG |
| N405P43B13 |
LOCKWASHER, 3/8 IN |
| 41A239654P1 |
GROMMET, SYNTHETIC RUBBER, 1/2 IN ID |
| 41B539064P71 |
CABLE MARKER (MARKED T19) |
| 41B539064P46 |
CABLE MARKER (MARKED T20) |
| N402P43B13 |
WASHER, 3/8 IN |
| 41B538426P1 |
FRONT PLATE |
| 84D730106G1 |
ROTOR ASSEMBLY |
| 41B532458G1 |
CORE, ROTOR |
| 84D730152P1 |
SHAFT, ROTOR |
| 41C637809G3 |
ROTOR COIL WITH POLE PIECE |
| 41A330750P1 |
COIL BRACE |
| 41A235755P2 |
SLIPPER STRIP, 44 IN LONG, 0.010 IN THK, SPRING STL |
| 41C637815G2 |
COLLECTOR RING ASSEMBLY |
| 41A235776P1 |
CONNECTION STRAP, 7.20 IN DEV LENGTH |
| 41B539014P1 |
TIE RING |
| 41A239176P21 |
GLASS TAPE, 0.015 IN THICK, 1 IN WIDE |
| 186V942P1 |
FASTENING |
| 8864950P338 |
BALL BEARING |
| 84C620825P1 |
BEARING HOUSING, 13 3/4 IN OD |
| 84C620826P1 |
BEARING CAP, 10 3/4 IN OD |
| 84B515201P1 |
FLINGER, 6 9/16 IN OD |
| 84B515203P1 |
SLEEVE, 5 3/8 IN OD |
| 84A206963P1 |
SEAL |
| 41B537696P1 |
GASKET, 0.031 IN THK |
| N22P33052B13 |
BOLT, HEX HD, 5/8 IN-11, 3 1/4 IN LONG |
| 41B537660P9 |
WASHER, FLAT, 0.725 IN ID, 1 IN OD |
| 84B515204P1 |
HUB, 5 3/16 IN OD |
| 41A231281P46 |
BRAZING STRIP, 1 IN X 1 IN LONG |
| 2766829ADP15 |
BALANCE WEIGHT, 10 1/2 IN OD, 3/4 IN WIDE |
| 2766829ADP54 |
BALANCE WEIGHT, 1 1/2 IN WIDE, 3/4 IN THICK |
| 41A238730P1 |
END PLATE |
| 41A330204P8 |
LUBRIPLATE |
| 84D730143G1 |
IMPELLER |
| 84D730164G1 |
FRAMEHEAD |
| 84E901339G2 |
INLET HOUSING |
| 84E901340G1 |
OUTLET HOUSING |
| N14P32036 |
BOLT, HEX HD, 5/8 IN 18, 2 1/4 IN LONG |
| N22P25028B13 |
BOLT, HEX HD,3/8 IN-16, 1 3/4 IN LONG |
| N14P29024B13 |
BOLT, HEX HD, GRADE 8, 1/2 IN-13, 1 1/2 IN LONG |
| N22P29072B13 |
BOLT, HEX HD, 1/2 IN-13, 4 1/2 IN LONG |
| N22P33028 |
BOLT, HEX HD, 5/8 IN-11, 1 3/4 IN LONG |
| N22P33036B13 |
BOLT, HEX HD, 5/8 IN-11, 2 1/4 IN LONG |
| 41B537660P1 |
WASHER, FLAT, 0.435 IN ID, 0.675 IN OD |
| 41B537660P6 |
WASHER, FLAT, 0.562 IN ID, 0.938 IN OD |
| 41B537660P9 |
WASHER, FLAT, 0.725 IN ID, 1 IN OD |
| 41B537660P12 |
WASHER, FLAT, 0.725 IN ID, 2 IN OD |
| N258P25B13 |
NUT, HEX, 3/8 IN-16 |
| N509P5022B |
PIN, SPRING DOWEL, 1/2 IN, 1 3/8 IN LONG |
| N5700P71 |
PIPE PLUG, 1 IN, SQ HD |
| 497A806P60 |
ADHESIVE, RTV SILMATE 1473 |
| 499A906AAP4 |
NUT, HEX, 3/8 IN-16, SELF-LOCKING |
| 41B539088ABG1 |
COVER ASSEMBLY |
| 41B539090P1 |
FRONT PLATE WITH TWO HOLES |
| 84C620937G1 |
COVER ASSEMBLY |
| 84C620937P2 |
GASKET |
| 4732253G2 |
LATCH |
| 497A806P12 |
CEMENT |
| N22P25012B13 |
BOLT, HEX HD, 3/8 IN-16, 3/4 IN LONG |
| N22P25016B13 |
BOLT, HEX HD, 3/8 IN-16, 1 IN LONG |
| N402P43B13 |
WASHER, 3/8 IN |
| N405P43B13 |
LOCKWASHER, 3/8 IN |
|
|
TEREX O&K TR35A 3305B/F/G/K
